Home / About us

About us

Laser-Welder supports stainless steel fabricators with handheld fibre laser welders, training and service that fit real workshop conditions in South Africa. From Spartan in Kempton Park to fabrication shops nationwide, we focus on practical results, clear guidance and support that keeps production moving.

About us

Built in Spartan for South African fabrication shops

Laser-Welder is based in Spartan, Kempton Park, right in the middle of one of Gautengs busiest industrial areas. That matters because we work close to the people who actually use the machines, from small stainless steel shops doing custom work to larger plants running repeat production. Our work centres on helping South African fabricators make cleaner, faster welds with equipment that suits local conditions and real workshop demands.

We spend time in fabrication shops, not just behind a counter. That means we see the same issues many South African teams face every day, uneven power supply, tight production deadlines, staff changes, and the need to keep quality high even when orders are mixed and urgent. Our approach is practical and hands-on, with demos, setup support and training that makes sense to operators on the floor.

What we stand for on the shop floor

Our work is guided by a few clear values: accuracy, responsiveness, and proper follow-through. Stainless steel fabrication leaves little room for guesswork. A good weld should be clean, strong and consistent, with less grinding afterwards and less time lost on rework. That is what we help teams work toward.

We also value straight answers. If a process needs adjustment, we say so. If a team would benefit from refresher training or a different setup for thin-gauge material, we deal with it early before it becomes a production problem. The result is a working relationship built on trust, not sales talk.

  • Clear advice based on workshop conditions
  • Support for operators, supervisors and owners
  • Focus on weld quality, uptime and repeatability
  • Practical help for both new and experienced teams

How our demos and training work nationwide

Many of our clients first meet us through a shop demonstration. We set up in working fabrication environments across Spartan, Kempton Park, Isando, Jet Park, Edenvale, Germiston, Boksburg and Alberton, then take the machine through the kind of material and joints the shop actually handles. That gives a realistic view of travel speed, heat input, finish quality and ease of use.

We also travel nationally for welder training at fabrication shops, because a machine only performs well when the team using it understands the process. Training covers safe handling, parameter selection, joint preparation, torch technique, cleaning routines and day to day operation. For multi-shift sites, we can also train more than one group so the knowledge stays in the business. That saves time later when staff rotate or production picks up unexpectedly.

Every demo and training visit is structured around the client’s actual work, not a general script. If a workshop is focused on tanks, frames, kitchen equipment or architectural stainless steel, we adjust the session accordingly. That makes the learning more relevant and it usually shortens the time before the machine is fully productive.

  • Shop demonstrations in Ekurhuleni and beyond
  • Operator training for new and experienced staff
  • Production rollout support for new equipment
  • Refresher training for teams that need confidence again

Support that continues after the machine is delivered

We know that purchasing welding equipment is only the start. Once a unit is in service, the real questions begin, how to set it up for different material thicknesses, how to keep the beam path clean, when to carry out preventive checks, and what to do if output changes during a busy week. Our support team is structured to help with those issues quickly and clearly.

Our service offering includes machine commissioning, process optimisation, preventive maintenance, breakdown response, spares supply, consumables support, remote help and weld testing. If a shop needs assistance after a breakdown, we work to get the issue understood and resolved without wasting time. Where possible, we support the team remotely first, then plan a site visit if it is needed.

In South Africa, support often has to work around load-shedding, shift pressure and production deadlines. We take that seriously. Good service is not just about fixing a fault, its about reducing downtime and helping the workshop plan better for the next job.

Fibre Laser Welding For Stainless Steel

For many stainless steel fabricators, handheld fibre laser welding has changed the way work gets done by producing neat welds quickly with less finishing afterwards. For workshops that handle thin stainless steel, repeat assemblies or visible welds, the process can reduce grinding, improve consistency and free up time for other work. That matters when labour is tight and deadlines are fixed.

Different workshops need different levels of support, and not every site starts at the same point. Some need help evaluating whether the process suits their work. Others already have a machine and need training, testing or fine tuning to get better results. We work across that full range, from first setup to ongoing production support.

Our customers also value the practical side of fibre laser welding in South African conditions. Clean work areas, proper extraction, stable handling procedures and correct maintenance all play a part in getting reliable output. We help teams build those habits into the daily routine so the machine keeps performing well over time.

  • Clean, strong welds with less finishing time
  • Useful for small workshops and larger manufacturing environments
  • Suitable for repeat production and custom work
  • Support that helps the process stay consistent

The team you will deal with

Laser-Welder is led by Wynand Oosthuizen, our Managing Director, with support from a team that handles training, technical sales, service and customer care. Tshegofatso Ramaboa leads national training, Gert Wessels manages technical sales, Ayanda Mthembu coordinates service, Reuben Daniels handles applications support, and Sindisiwe Makhado leads customer support. Each person has a clear role, so enquiries are handled by someone who understands the work.

That structure helps us respond properly when a client needs advice on commissioning, a demonstration in a fabrication shop, a follow up on training, or assistance with a production issue. It also means customers are not passed around unnecessarily. When you deal with us, you deal with people who know stainless steel fabrication and who understand the pressure of keeping a shop running.

We keep communication direct and practical. If a customer contacts us through the enquiry form on our contact page, they get a response that aims to move things forward, whether that means a demo, a training plan, a service call or a better way to handle a particular welding job. That is how we prefer to work, simple and proper.

What you can expect when working with us

From the first enquiry to after-sales support, our aim is to make the process easy to manage. We do not overcomplicate things. Instead, we look at the material, the application, the workshop setup and the production target, then recommend the most useful next step. That might be a shop demonstration in Spartan or Germiston, a full operator training session, or support to improve a process already in place.

Clients come to us because they need practical improvement, not vague promises. We aim to leave every site with better understanding, better control and a clearer path forward. Whether the job is in Kempton Park, Boksburg, Alberton or further afield, the standard stays the same: careful work, honest advice, and support that holds up under pressure.

That is what About Laser-Welder means in practice. A local team with national reach, built around service, training and the day to day needs of South African fabricators.

Questions we get asked

Where is Laser-Welder based?

We are based in Spartan, Kempton Park and support fabricators across Ekurhuleni and nationwide.

Do you offer training at customer sites?

Yes. We do welder training and shop demonstrations at fabrication shops across South Africa, including rollout support for new teams.

What support do you provide after purchase?

We assist with commissioning, operator training, process optimisation, preventive maintenance, breakdown response, spares, consumables, remote help and weld testing.

Book a handheld laser welding demo.

Contact form