Home / Demos / Kempton Park Demos

Demos

Kempton Park Demos

Kempton Park fabricators can arrange nearby handheld fibre laser welder demonstrations and workshop-based operator training. We work with stainless steel teams in Spartan, Isando, Jet Park and the wider East Rand, with enquiries handled through the contact page form.

Kempton Park Demos

Kempton Park demonstrations for working fabrication shops

Our Kempton Park demo service is set up for stainless steel fabricators who want to see a handheld fibre laser welder on real jobs, not just on a test piece. We visit workshops in and around Kempton Park, including Spartan, Isando, Jet Park and nearby industrial nodes, so your team can judge the machine on your own material, joint types and finish requirements. That means fillet welds, corner joints, thin sheet, tube work and repeated production parts can all be assessed properly.

Most demo visits are arranged around your shift times and production pressure, because many shops can not afford long stoppages. We keep the process practical: bring the parts, set up the machine, run test welds, then review heat input, bead profile and clean-up time. If needed, we can also cover welding on slightly tarnished material or after normal shop prep, so the results reflect day-to-day conditions, not a perfect lab set-up.

Who in Kempton Park usually books a demo

The local clients we see most often are stainless steel fabricators, sheet metal shops, food-grade equipment builders, tank makers, balustrade teams and maintenance workshops. Many are looking to reduce grinding, improve weld appearance and speed up repeat work. Others want to compare handheld laser welding with traditional processes on thin stainless sections where distortion has been causing rework.

  • Custom fabrication shops working on 1 mm to 6 mm stainless steel
  • Kitchen, dairy and food processing equipment makers
  • Balustrade and architectural metalwork teams
  • Jobbing workshops handling repairs and production runs
  • Manufacturers wanting cleaner welds with less finishing time

In Kempton Park, many of these shops are under pressure to turn work fast and keep labour focused on output. A demo helps you see if the process fits your team, your floor space and your output targets before you make any decision.

Workshop training that fits local production schedules

Our operator training is done at fabrication shops rather than in a classroom environment, so your team learns on the equipment they will actually use. Training covers safe start-up, weld settings, handling technique, joint preparation, cleaning, focus adjustment, basic fault finding and daily care of the machine. We also cover how to get repeatable results across different thicknesses and stainless grades, which is where most teams need the most guidance.

In Kempton Park and the surrounding industrial areas, we often work around load-shedding schedules, shift changes and dispatch windows. That makes a difference because teams want training that does not interrupt a packed production day. Tshegofatso and Reuben often work together on site training and process coaching, and if a shop needs refresher training later on we can return for another session once the team has had time on the machine. It is normal for a new operator to need a second round after the first busy week, and that is fine.

  • Operator training for new staff and new supervisors
  • Refresher training for teams already using the unit
  • Process optimisation for cleaner welds and faster handling
  • Weld testing on your own parts before production rollout

Travel into Kempton Park and fast turnaround support

Because we are based in Spartan, Kempton Park is one of the quickest areas for us to reach. That helps when a shop needs a demo, machine commissioning or a quick check after installation. We also service nearby areas like Edenvale, Germiston, Boksburg and Alberton from the same support base, so turnaround is generally faster than calling in help from much further out.

For commissioning or production rollout, we will confirm the site access, working hours and the type of metal being processed before the visit. That lets us bring the right consumables and test material the first time round. If your workshop has access constraints, narrow aisles or shared yard space, please mention it on the contact form so we can plan the visit properly. In many Kempton Park industrial parks, parking and delivery access can be tight, so the better the brief the smoother the day.

Local conditions that affect laser welding in Kempton Park

Workshops around Kempton Park deal with the usual East Rand realities: dust, vibration, uneven power supply and plenty of traffic moving in and out of industrial yards. Stainless steel work also tends to sit in the middle of production lines that already have cutting, bending and finishing jobs on the go. A handheld fibre laser welder has to fit into that space without causing extra handling or slowing the team down.

Coastal humidity is not a major issue here, but contamination from grinding dust, oily fingerprints and poor edge prep still affects weld quality. We advise teams on cleaning, fit-up and storage so the welds stay consistent. On some sites, power interruptions mean planning around generators or staggered shifts, so our support recommendations are practical rather than idealised. The aim is steady output, less rework and fewer stops for touch-ups.

What we stock, cover and support from Spartan

From our Spartan base, we support the equipment and consumables that matter most to local fabricators using handheld fibre laser welders. That includes machine commissioning, preventive maintenance, breakdown response, remote help, spares supply, consumables support and weld testing. We also assist with production rollout when a workshop is moving from trial work into regular use, which is often where the real questions begin.

  • Commissioning for new machines and new operators
  • Consumables and spare parts support
  • Remote help for setup and basic fault checks
  • Preventive maintenance to reduce avoidable downtime
  • Breakdown response for urgent workshop issues

If a team in Kempton Park needs a specific setup for stainless steel sheet, tube or light fabrication, we will work through the process with them and recommend the right sequence for better repeatability. The service is direct and practical, with enough follow-up to keep production moving without extra fuss.

How to arrange a Kempton Park demo or training visit

To arrange a demo or workshop training in Kempton Park, use the enquiry form on our contact page and tell us what you want to weld, where the shop is located and when your team can stop for a session. Include the material thickness, the kind of joints you run most often and whether you want a side-by-side comparison with your current process. That helps us prepare properly and bring the right support on the day.

Wynand Oosthuizen leads the business, with Gert Wessels on technical sales, Ayanda Mthembu coordinating service and Sindisiwe Makhado handling customer support follow-through. For Kempton Park clients, the advantage is simple: nearby access, practical training and a support team that understands workshop pace. If your shop is ready to see what the machine can do on your own work, start with the contact form and we will take it from there.

What our Laser Welding customers say

Verified Google reviews

Questions we get asked

Can you do a demo at our Kempton Park workshop?

Yes. We can arrange a nearby demo at your workshop, using your own stainless steel parts so you can judge weld quality, speed and clean-up time properly.

Do you offer training for operators who are new to laser welding?

Yes. We provide workshop based operator training for new users, plus refresher sessions once the team has some time on the machine.

What support do Kempton Park clients get after the demo?

Support can include commissioning, process optimisation, remote help, consumables supply, preventive maintenance and breakdown response where needed.

Book a handheld laser welding demo.

Contact form