Home / Support / Service Help

Service Help

If your handheld fibre laser welder is down, running hot, or not giving the finish you need, our support team can assist. We help with breakdown response, scheduled maintenance and technical advice for shops in Spartan, Kempton Park and across South Africa.

Service Help

Fast support when production cannot wait

When a machine stops in the middle of a job, the cost is not only the repair. It is lost time, delayed deliveries and a team standing around waiting. Our service help is set up for fabricators who need practical answers, whether you are working on stainless handrails, tanks, trolleys or food-grade assemblies.

For service help, send the details through our contact page form and include the machine issue, site location and what the operator is seeing. In many cases we can guide your team through checks over the phone or by remote help first, then arrange the next step if an on-site visit is needed. If a unit needs workshop attention, we will explain the process clearly so you know what to expect.

What to check before you log a breakdown

A few simple checks can save a long stoppage. Before sending in a fault, have your operator note the machine model, the material thickness, the wire or filler being used, and any error message on screen. If the issue started after a power interruption or during load-shedding, mention that too because voltage dips can affect settings and cooling.

  • Confirm the mains supply is stable and the isolator is on.
  • Check shielding gas flow, hose condition and regulator settings.
  • Inspect the torch, fibre lead and consumables for damage or loose fittings.
  • Make sure the cooling unit has water at the correct level and no warning light.
  • Test the machine on a clean offcut so the fault can be repeated.

These small steps help us narrow down whether the problem is setup, wear or a part that needs replacement.

Breakdown response and fault finding in the workshop

Our breakdown response service is aimed at keeping your production moving with as little disruption as possible. For workshops in Spartan, Isando, Jet Park, Edenvale, Germiston, Boksburg and Alberton, we can often coordinate support around your shift plan so the whole day is not lost. For sites further out, we arrange remote fault finding and on-site attendance where practical.

We look at the full welding setup, not only the machine itself. That includes the gas supply, cooling, cable routing, lens condition and operator handling. Sometimes the issue is as simple as poor joint prep or incorrect travel speed, and sometimes it is a worn component that needs replacing. Either way, we aim to get you back to clean, steady welds without guesswork.

  • Remote help for setup and fault isolation
  • On-site troubleshooting for production stoppages
  • Repair planning for recurring faults
  • Feedback on process settings and operator handling

Scheduled maintenance that protects uptime

Preventive maintenance is the easiest way to avoid surprise failures. In South African workshops dust, grinder swarf and humidity can all affect performance, especially near the coast or in busy fabrication bays with poor extraction. Regular checks keep optics cleaner, cooling stable and cable connections in good order.

We can help set up a maintenance schedule that suits your workload. Some shops need monthly inspections because they run every day, while others only need quarterly checks and consumable replacements. If your team runs multiple shifts, a planned service window after hours or over a weekend can reduce downtime and keep orders on track.

Good maintenance also makes training easier because operators work with a machine that behaves predictably. That means less rework and fewer awkward welds on thin stainless sheet.

Training that fixes the cause, not only the symptom

Many service callouts are really process issues. That is why our training is part of service help, not a separate extra. We cover safe use, correct torch handling, weld parameter selection, joint preparation and basic machine care. If your team is learning on food-grade stainless or decorative work, we can also focus on appearance, colour control and heat management.

We train operators at fabrication shops nationwide and can tailor the session to your team size, from one welder to a full production crew. If a new operator is joining or a machine is being rolled out to another bay, refresher training can help keep standards consistent.

  • Operator training for new staff
  • Refresher training for experienced welders
  • Process optimisation for better finish and speed
  • Production rollout support for multiple machines

Spare parts, consumables and clear follow up

When a machine needs a part, delays can become expensive. We support spares supply and consumables support so your workshop is not left waiting for a simple replacement. That can include wear items, tips, lenses, hoses and related accessories used in day to day operation.

After a service job we also keep the follow up practical. If settings were adjusted during the visit, we make sure the operator understands what changed and why. If the fault may return under certain conditions, we flag those conditions clearly. It is a straightforward approach, with no fancy talk and no confusion later on.

For businesses in Ekurhuleni and beyond, the goal is the same: keep the machine ready, keep the welds consistent, and keep your team productive even when the schedule is tight.

Questions we get asked

How do I request service help?

Use the enquiry form on our contact page and tell us the machine issue, your suburb, and whether you need breakdown response, maintenance or technical support.

Can you assist if the fault happens after load-shedding?

Yes. Let us know if the issue started after a power interruption. We can help check supply stability, cooling, settings and any damage caused by voltage dips.

Do you provide training with service visits?

Yes. If operator handling or process setup is part of the problem, we can include training or refresher support so the same fault does not keep coming back.

Book a handheld laser welding demo.

Contact form