Home / Welders / Entry Level Package

Welders

Entry Level Package

The Entry Level Package gives stainless steel fabricators a practical way to bring handheld fibre laser welding into the workshop without overcomplicating the first step. It is set up for clean welds, shorter prep time and easier training on small to medium production jobs.

Entry Level Package

A practical first machine for stainless steel work

This package is aimed at fabricators who want a dependable starting point for handheld laser welding on stainless steel. It suits workshops that are moving from TIG, or adding laser welding for better speed on repeat parts, visible joints and thin sheet work. The machine is supplied as a working package, not just a unit, so you can get going with the right torch, cooler, wire feed setup and basic operating support.

It is a sensible fit for jobbing shops in Spartan, Kempton Park, Isando, Jet Park, Edenvale, Germiston, Boksburg and Alberton where stainless handrails, food-grade items, cabinet frames and cover panels are made in small batches. The Entry Level Package helps operators produce neat seams with less grinding afterwards, which is useful when labour is tight and turnaround matters.

What the package includes and the size options

The package is normally supplied as a handheld fibre laser welding set with a compact power source, integrated hand torch, wire feeder and cooling arrangement suited to the chosen output level. We can configure the package for lighter sheet work or for more general fabrication, depending on the thickness range you work with most often.

  • Typical output options: 1 000 W, 1 500 W or 2 000 W
  • Working modes: weld, spot and cleaning functions where specified
  • Hand torch with protective lens set and nozzles for stainless work
  • Wire feeder for filler-assisted welding on gaps and corner joints
  • Cooling unit matched to the machine output
  • Starter consumables for commissioning and first production runs

For most first-time users, the 1 500 W unit is the most practical choice. It gives enough headroom for common stainless jobs while keeping the setup manageable in a smaller bay. If you are only doing very light gauge work, the 1 000 W option may be enough, but it is worth checking your daily mix before you order.

Where it suits in the workshop

This package is built for stainless steel fabricators that need cleaner welds on visible parts, repetitive assemblies and work that must be passed on quickly to the next operation. It is especially useful where heat distortion must be kept under control, or where the team spends too much time on finishing after TIG welding.

It works well on items such as stainless frames, brackets, trays, handrails, cladding sections, guards and thin sheet assemblies. In coastal areas, where humidity can affect stored consumables and open steel, the faster weld process can help reduce time spent with parts sitting around between stages. In busy shops, that makes a difference when load-shedding or late deliveries have already pushed the schedule back.

  • Best for stainless steel fabrication and light production work
  • Useful where appearance matters and post-weld finishing must be reduced
  • Suitable for workshops with mixed skill levels, as training is straightforward
  • Handy for short runs, repeat parts and urgent repair work

Power, gas and installation needs

Before installation, check that your supply, floor space and shielding gas are ready for the machine you choose. Most entry level units need a stable electrical feed and a clean area with enough room for the main cabinet, cooler and wire feeder. A level floor and sensible cable routing also help keep the setup safe and tidy.

On power, the exact requirement depends on the output level, but you should plan for a dedicated supply with proper protection and correct earthing. In workshops where voltage dips are common, especially during load-shedding recovery, a stable feed and correct installation make a real difference to machine life. For gas, stainless jobs usually run with a suitable shielding gas such as argon based protection, and the flow must be set correctly for the nozzle and joint type.

  • Allow space for the main unit, chiller and torch movement
  • Provide a clean, dry area away from grinding dust and oil mist
  • Check supply voltage, breaker size and earthing before delivery
  • Keep shielding gas cylinders secured and stored in line with workshop rules

Training, setup and daily use

We supply commissioning and operator training so your team can start with the right settings and work method. That includes basic torch handling, joint preparation, focus adjustment, wire feed settings and simple checks for bead shape and penetration. If your team is new to laser welding, the first sessions are usually done on sample pieces before production parts go through the machine.

For workshops in Ekurhuleni and across South Africa, we can arrange demonstrations on site at fabrication shops, which is useful when you want to test the machine on your own stainless material. That way, the team can compare weld speed, bead appearance and fit-up needs before committing to a full rollout.

  • Operator training for new users and experienced welders
  • Refresher training for changing product lines or new shifts
  • Process optimisation for cleaner fit-up and better speed
  • Weld testing on sample joints before production begins

Machine care, service work and checks before you order

Like any production machine, the Entry Level Package needs regular care to stay consistent. Keep lenses clean, check the cooling system, inspect cables and torch parts, and replace consumables before they start affecting weld quality. A quick daily check saves time later and helps avoid stoppages when the order book is full.

When ordering, it helps to know your most common stainless thicknesses, whether you use filler wire, how much production you expect per shift, and whether you need mobile demonstration support before purchase. You should also confirm the shop power available, the floor space near the workbench and whether you want the machine set up for handrails, sheet metal or general fabrication. If the machine will be used by several operators, make sure you ask for training that covers all shifts and not just the day team.

  • Check your main material thickness and joint types
  • Confirm power availability and any site restrictions
  • Decide if you need wire feed for gap filling
  • Ask about preventive maintenance and spares supply from the start

Key facts

Package typeHandheld fibre laser welding starter package for stainless steel
Output options1 000 W, 1 500 W or 2 000 W depending on duty and application
Typical material useStainless steel sheet, tube, frames and light production assemblies
CoolingMatched cooling unit supplied with the selected package
Assist gasArgon based shielding gas for stainless welding
SupportCommissioning, operator training, remote help, spares and service support

What our Laser Welding customers say

Verified Google reviews

Questions we get asked

Is the Entry Level Package suitable for a small workshop?

Yes, it is made for small to medium workshops that want a proper start with handheld laser welding, without taking on more machine than they need.

What stainless thickness can it handle?

That depends on the output option, joint prep and speed. We normally help match the machine to the thickness range you use most often, from thin sheet up to more general fabrication work.

Do you offer training at our premises?

Yes, we can do demonstrations and welder training at fabrication shops nationwide, including Spartan, Kempton Park and surrounding Ekurhuleni areas.

Book a handheld laser welding demo.

Contact form