Home / Guides / Hire Vs Buy

Guides

Hire Vs Buy

A short term evaluation or direct purchase should match your workshop, the weld quality you need, and the production pressure you work under.

Hire Vs Buy

Start with the job, not the machine price

The right choice depends on what you need the welder to do over the next 3 to 12 months. If you are testing new operators, trialling a change in process, or handling a temporary run of stainless parts, hiring can keep risk low. If your workshop already has repeat work, predictable volumes, and enough demand to keep the machine busy most weeks, buying usually makes better sense.

For many Ekurhuleni fabricators, the real question is not whether a handheld fibre laser welder works, but whether it will reduce grinding, rework and finishing time enough to justify the spend. In small shops around Spartan, Kempton Park and Jet Park, one machine can be enough to cover a steady mix of tanks, guards, brackets, frames and stainless assemblies. In larger plants, the same equipment may need to slot into a line without holding up output.

When hiring makes better business sense

Hiring is useful when you need evidence before committing capital. It gives you time to confirm weld quality on your own material, with your own joints, fit up and operators. That matters because stainless work changes from shop to shop. Thin sheet, thicker plate, polished finishes and awkward access all behave differently, and one off test pieces do not tell the full story.

It is also a practical move when cashflow is tight or when you are waiting on a bigger order before buying equipment. Some workshops use a short term evaluation to train one lead operator first, then roll the process out after the team sees the difference. That approach helps if you are dealing with load-shedding, changing production schedules or a mixed work load that makes long term planning difficult.

  • Choose hire if you want to test weld quality on your own jobs.
  • Choose hire if you need a machine for a short contract or seasonal spike.
  • Choose hire if your team still needs hands on practice before rollout.
  • Choose hire if you want to compare labour savings before spending capital.

When buying is the stronger option

Buying usually suits workshops with regular stainless fabrication and enough throughput to keep the machine earning its keep. If you are welding the same material grades and joint types every week, a purchase gives you control over scheduling, operator availability and production planning. You are not waiting on a return date or juggling another site’s booking.

Ownership also makes more sense when you want to build an internal process around the machine. That includes commissioning, operator training, preventive maintenance, spare parts planning and refresher training. Once the team knows the settings and the workflow, the machine becomes part of daily output not just a trial unit. For many shops, that reliability is worth more than the lower upfront cost of hiring.

A direct purchase can also be easier to justify when you calculate total cost over 12 to 24 months. If the machine is replacing grinding time, reducing filler use and limiting rework, the numbers can shift quickly. In a busy fabrication shop, that is often where the decision becomes clear.

Use this simple decision checklist before you commit

If you are stuck between the two options, work through the basics below with your foreman, estimator and production team. Do not guess. Compare the machine cost against the time saved on actual jobs, not on best case assumptions.

  • How many stainless jobs do you complete in a typical month?
  • How many operators need training before the machine can be used safely and productively?
  • Will the machine be used daily, weekly, or only on selected contracts?
  • Can your current power supply and workshop setup handle the equipment?
  • Do you need to prove weld quality to a client before full rollout?
  • Would short term hire be enough, or do you need the machine available all the time?

If most of your answers point to steady use, buying usually wins. If the answers are uncertain, hiring gives you a cleaner way to measure what the machine will actually do in your shop. The point is to avoid buying too early or hiring for too long and paying more than you should.

What to test during a short term evaluation

A proper trial should go beyond a quick demonstration. Ask for a shop based evaluation on the same stainless material, joint prep and finish standards you use every day. Check how the machine performs on thin gauge work, corner joints, fillet welds and longer seams. If your team works in a hot shop with humidity from the coast or dust from nearby cutting and grinding bays, test under those conditions too.

During the evaluation, focus on repeatability. One neat weld is not enough. You want to know whether the second operator can achieve the same result, whether settings are easy to record, and whether the team can keep pace after lunch, after load-shedding, or after the shift changes. That is the real test of whether the process will hold up in production.

  • Check bead quality, heat control and finish consistency.
  • Measure time saved against your current welding and grinding method.
  • Confirm how long it takes to train a new operator.
  • Test the machine on your hardest jobs, not only the easy ones.

Plan for training, support and downtime before you decide

The machine is only part of the decision. You also need support for commissioning, operator training, process optimisation and breakdown response. If your team has never used handheld fibre laser welding before, a proper handover matters. Good training shortens the learning curve and helps avoid bad habits that cost time later.

Think about maintenance and consumables as well. A workshop that runs long shifts or has urgent delivery dates cannot afford to wait days for help. If you are in Ekurhuleni, or sending work in from elsewhere in Gauteng or coastal towns, it helps to have a clear plan for remote help, spares supply and refresher training. That way the machine stays part of production instead of sitting idle when a small issue comes up.

In practical terms, hiring can buy you time to build that support structure. Buying makes sense once the team is ready and the process is steady. Either way, the best choice is the one that fits your workload, your operators and your delivery commitments, not just the price on the quote.

Questions we get asked

How do I know if hire is enough for my workshop?

If you only need the machine for a short contract, a trial run, or a limited learning period, hire is usually enough. If the same stainless work keeps coming in month after month, buying is often the better long term option.

What should I check before buying a handheld fibre laser welder?

Check your daily job mix, operator training needs, power setup, maintenance plan, and whether the machine will be used often enough to justify ownership. A test on your own material is also important.

Can a short term evaluation include training and testing?

Yes. A proper evaluation should include shop demonstrations, weld testing, operator training and a review of how the machine fits your production flow. That gives you a fair basis for the hire or buy decision.

Book a handheld laser welding demo.

Contact form